MAZDA MX6 SPECIFICATION OF MODIFICATION:
Exterior:
Budi Prasetyo do make over modifications to the car on the outside first. The first step focused on the installation of a full body kit which drafted its own. Start spoiler, front rear bumper, side skirts to custom looks and aerodynamics. Widening of the body as much as 5 cm is also appended to give the impression of manly on mounts.
To enhance the sporty, Budi did not hesitate to throw a pair of doors at the rear. Now, the remaining two doors located on the front. To be more eye-catching car modifications, the model made Gull wing door openings. Move to the front, also created a custom hood. To enhance the appearance, male 29-year post-style wing custom C-West.
While all complement stuck, Budi flushed the body of a car with two kinds of paint. Dominant bright colors combined with black and metallic orange.
To dirty feet, Budi replace total. Start suspension, wheels, until the rubber pads. He cut the legs as much as three-screw. Budi wearing a trestle five models with the color orange for the wheels. Gambot wheel size of 19 inches was wrapped with racing tires sized 245/35 front and 265/35 for the rear.
Interior:
Part in bonding with the feel of a racing car modification. Seat, pedal set, shift knob, and steering wheel in racing branded-branded materials. Atmosphere with a contrasting color, dark orange, create an image in a better light. Starting seats, door trim, dash up to the old orange paint finishing with the same brand of paint.
Budi also apply the two-seat steering on his car. Normally the model sports car. In the interior it, Budi has spent as much as Rp 10 million budget.
Audio:
Mastering audio devices up to half a car cabin baggage. Original Sound replaced other brands with features single disc. Three sets of speakers mounted 6 inch spread from front to rear. Also, there are two pairs of tweeters on the dash and rear of the car. Not to forget two subwoofers in the rear trunk.
Budi install additional devices 1F two capacitor banks and sub-NOS. Budi spent Rp 20 million for modifications to the car entertainment ears.
Engine:
Budi lot of reforms for this section. "Actually, I'm afraid to ride high-speed car. But since my final assignment on NOS system in the car, yes I need a car Relax victims, "said the alumnus of Mechanical Engineering of ITS it.
Car capacity of 2000 cc and capable of producing 230hp now experiencing increased after NOS tubes installed. Mazda MX6 strength that now has 350hp. A total of USD 12 million spent to revamp the kitchen runway once final study Budi.
Before each drag race (also known as a pass), each driver is allowed to perform a burnout (which heats the tires and lays rubber down at the beginning of the track, improving traction). Each driver then lines up (or stages) at the starting line. Informal drag races can be started by any means, including flag-waving and arm-dropping. These methods are more likely to be seen in an un-professional setting, being most popular with illegal street racing. Professional sanctioned drag races are started electronically, with a series of vertically-arranged lights known as a "Christmas tree" or just "tree". A "Christmas tree" consists of a column of lights for each driver/lane. In each column, the top two lights are small amber lights connected to light beams on the track, which when broken by the vehicle's front tires indicate that the driver has pre-staged (approximately 7 inches (180 mm) from the starting line) and then staged (at the starting line).
